Motor control evaluation board
DVE offers an “easy to use” evaluation board to prove and evaluate the performance of the Motor-control IP core and REDBUS Ethernet interface. A software GUI, available for Windows and Linux operating systems, allows real-time monitoring and control of eight motors simultaneously.
Main characteristics
Sofware GUI
The Software GUI provides a control and monitor interface for one or more evaluation board. It is available for Windows and Linux operating systems. It is connected to the motor control boards via a standard 100BaseT Ethernet interface.
- Four independent 6A peak motor drivers
- Four independent 3A peak motor drivers
- Precision windings current measure with dedicated 12bit A/D
- Back-EMF detection circuits on all motors
- Four QEI interfaces for encoders
- 1 RS-232 interface
- 1 USB interface for CPLD JAG programming and second UART with standard FTDI device
- REDBUS (Real-time Ethernet) interface
- GPIO connector through CPLD I/Os
- Optional Cortex M3 processor with dedicated USB device interface and connections to CPLD through SPI and I2C bus
- 3 Axes MEMS accelerometer
- External power supply from 18V to 48V
Sofware GUI
The Software GUI provides a control and monitor interface for one or more evaluation board. It is available for Windows and Linux operating systems. It is connected to the motor control boards via a standard 100BaseT Ethernet interface.
Documentation
For more information about those products, please send your questions using the contact form.
For more information about those products, please send your questions using the contact form.